Contact Us

SPF9000 Automated Cantilevered Sliding Gate 

The SPF9000 Automated Cantilevered Sliding Gate is designed for areas where swing gates aren’t feasible and a 12m opening can be achieved. Gates come fully automated with the motor fitted into the portal post making them plug and play!

Standard specifications:

  • All automated gates comply with BS/EN 12453
  • Single Phase power supplying 3 phase motor
  • 100% duty cycle heavy industrial usage
  • Programmable control c/w fault diagnostic on screen display
  • Width Maximum 12m drive through opening
  • Height Maximum 2.4m (12m width) 3m (10m width)
  • Steel Construction of Gate Leaf and Main Tower All Components are Galvanised or Zinc Plated Steel and dual compound epoxy low bake finish to any RAL colour

Examples of SPF9000 Automated Cantilevered Sliding Gate 

The SPF9000 Cantilevered Sliding Gate doesn’t need a track all the way along which means less ground works required and it can be installed on uneven ground, over block-paving, grass, gravel or even water! Like all of our automated gates the infill can match any style of fencing or be contrasting. Palisade W or D section, weldmesh, railings or even louvered.

As an alternative option cantilevered gates can be installed as a manual option with the motor rack build in so the gate could to be automated at a later date if required.

All automated gates comply with BS/EN 12453. We fit as standard a number of safety devices, including dead man’s key switch, emergency stop button, 6 number live monitored safety edges, flashing warning light and duel height photo cells.


Ensure you tell us the height and number of metres required. Upload images of the areas and/or site plans, even a hand drawn layout sketch will do.